Features and Benefits
0 – 30 kV AC Power Frequency AC Hipot
The PFT-301CM and PFT-301CMF are from our popular PFT Series of field portable AC hipot test sets. These hipots provide continuously adjustable AC voltage used for a pass/fail, AC over-voltage withstand test on high voltage apparatus, like switchgear, circuit breakers, reclosers, vacuum bottles, hot sticks, bus duct, and any other apparatus needing an AC test voltage. The PFT Series offers the most field portable, affordable, and easiest to operate AC hipots at this voltage and power. Equipped with a two-range voltmeter, three-range current meter and guard circuit for precise leakage current measurements. For bench-top requirements see the ABT Series. Testing loads that require higher power, see our ALT, FPA, HPA and PAR lines of AC dielectric test sets.
Convenient one-piece field portable design
Secondary connected single range Voltmeter: 0 – 30 kV AC
Single Range Current Meter: 0 – 40 mA AC
Fixed overload set to 120% of variable transformer rated output current
Transit protected meters prevent meter damage between test sites
20 ft shielded output and return cables
Zero Start and External safety Interlock provisions
Specifications
Input:
(PFT-301CM) 120 V, 60 Hz, 10 A
(PFT-301CMF) 230 V, 50/60 Hz, 5 A
Output:
0-30 kV AC, 1 kVA resistive load
1 kVA capacitive load, 33 mA current
Duty:
1 kVA: 1 hour on, 1 hour off
700 VA: Continuous
Voltmeter:
3.5”, scaled 0-30 kV AC, ±2% F.S.
Current Meter:
3.5”, scaled 0-40 mA, ±2% F.S.
Meter Accuracy:
2%
Distortion:
Less than 5%
Size & Weight:
(W x D x H)
17 x 11.5 x 14 in., 45 lb.
431 x 292 x 365 mm, 20 kg
Output Termination:
8 ft. (2.5 m) shielded EPR output cable with alligator clamp
Scope Of Supply:
20ft black ground lead, external interlock plug, operations
manual, calibration certificate
Optional Accessories
Hand & Foot Safety Switches
PN 90-410
PN 90-405
Safety Ground Sticks
PN 88-150
PN 88-113
Optional Upgrades
Digital Metering – Add Suffix “D”