Features and Benefits
The PTS-100 and PTS-100F are combination high voltage DC proof tester and megohmmeter. Dielectric strength and insulation resistance testing are combined into one instrument saving time, money, size and weight. Equipped with a 5-range current meter scaled 0 – 1 dc microamps for accurate current measurement down to a 10 nanoamp resolution in the x1 range. Using the alternate scale on the current meter allows the PTS Series to double as a Megohmmeter up to 10 teraohms, scaled 100-1 megohms, insulation resistance can be taken at any voltage. An accurate 2 range voltmeter rounds out the standard instrumentation. Additional features include ruggedized anti-static and transit protected meters, rugged two piece design with foam padded handles, full-wave bridge rectifier, internal shorting solenoid with discharge resistors, and is CE marked. For other voltage options, please see the rest of our PTS Series which range from 15kV to 600kV DC. See our DBT Series for bench-top options.
20 foot (6 meter) shielded output cable, ground and return leads
5 range current/megohmmeter for accurate leakage current
Megohm readings at any output voltage up to 10 teraohms
Full-wave bridge rectifier
Internal HV Shorting Solenoid with discharge resistors
Automatic transit protected meters with Anti-static glass face
Under lid and HV tank mounted storage for all accessories
External safety and zero start interlocks
Specifications
Input:
PTS-100 – 120Vac, 60Hz, 10A
PTS-100F – 230Vac, 50/60Hz, 5A
Output:
0 – 100 kV DC @ 10 mA, negative polarity, positive ground
Full Wave Bridge Rectification
Duty:
Continuous, capacitive charging
Voltmeter:
3.5”, scaled 0 – 50/100 kV DC, ±2% F.S.
Current Meter:
3.5”, scaled 0 – 1.0 μAdc, ±2% F.S. with multipliers of x 1, x 10, x
100, x 1 k, x 10 k. Guard/ground load return
Megohmmeter:
Scaled 100 -1 MΩ ±2% F.S. with multipliers of x 0.1, x 1, x 10,
x 100, x 1 k
Size & Weight:
(W x D x H)
Case:
14 x 11 x 14 in., 30 lb.
356 x 279 x 356 mm, 14 kg
HV Tank:
9.5 x 11.75 x 14.5 in., 68 lb.
241 x 298 x 368 mm, 31 kg
Output Termination:
20 ft. (6m) shielded EPR output cable with alligator clamp EPR cable stays flexible in cold weather
Scope of Supply:
20ft EPR shielded output cable, 20ft red test lead, x2 20ft black test leads, 14in safety ground stick, external interlock plug, operations manual, calibration certificate
For aerial lift testing, an optional 50′ (15 m) HV output cable is recommended. If 50’ of output cable is ordered, the model number becomes PTS-100U.
Optional Accessories
Hand & Foot Safety Switches
PN 90-410
PN 90-405
Safety Ground Sticks
PN 88-150
PN 88-113 * included
Reuseable Shipping Case
PN 32-0395 (Control Section)
PN 32-0396 (HV Section)
Optional Upgrades
3.5 Digit Digital Meters – Add Suffix “D”